: | Feb 28, 2005 |
. | Disconnect the battery ground cable. |
. |
Raise and support the vehicle. |
. | Drain the cooling system. |
. | Remove the throttle body gasket. |
. | Remove the crankshaft front oil seal. |
. | Remove the cooling fan lower shroud.
![]() |
. | Remove the air conditioning (A/C) compressor.
|
. | Remove the A/C compressor mounting bracket.
![]() |
. | Remove the cooling fan drive belt tensioner.
![]() |
. | Disconnect the coolant expansion tank hose.
![]() |
. | Remove the coolant manifold.
![]() |
. | Release the engine wiring harness clips. |
. | Remove the accessory drive belt idler pulley.
![]() |
. | Remove the coolant pump pulley.
![]() |
. | Remove the RH exhaust manifold heat shield.
![]() |
. | Disconnect the battery positive cable.
|
. | Remove the generator.
![]() |
. | Remove the generator mounting bracket.
![]() |
. | Remove the RH valve cover. |
. | Remove the LH valve cover. |
. | Remove the engine front cover.
![]() |
. | Install the engine front cover.
![]() |
. | Evenly and progressively tighten the bolts in
the sequence shown to 12 Nm (9 lb.ft). ![]() |
. | Install the crankshaft front oil seal. |
. | Install the LH valve cover. |
. | Install the RH valve cover. |
. | Install the generator mounting bracket.
|
. | Install the generator.
|
. | Connect the battery positive cable.
|
. | Install the RH exhaust manifold heat shield.
|
. | Install the coolant manifold.
|
. | Install the coolant expansion tank hose.
|
. | Install the coolant pump pulley.
|
. | Install the accessory drive belt idler pulley.
|
. |
:
Secure the engine wiring harness clips. |
. | Install the cooling fan drive belt tensioner.
|
. | Install the A/C mounting bracket. |
. | Install the A/C compressor. |
. | Install the cooling fan shroud. |
. | Install the throttle body gasket. |
. | Refill and bleed the cooling system. |